carrier_access_adit_600_ban

Carrier Access Adit 600   Configuration & Ordering Information

 

adit600sm3

Adit 600 Broadband Customer Service Terminal which fulfills many channel bank, multiport CSU/DSU, Integrated Access Device, distributed DLC and Digital Cross-connect applications. Supports up to 18 T1s or E1s, 48 voice channels, 40 ISDN BRI ports, 12 V.35 ports, 24 All-Rate OCU-DP ports. Integrated SNMP and GUI management software. The most versatile small access platform available.

 

 

Call us at 1-877-877-0872 for discounts and pricing. You can also reach us by email: This email address is being protected from spambots. You need JavaScript enabled to view it.

 

Configured T1 Systems

Adit 600 Base 115/-48V 02-AA1-000000-00 115/-48V Chassis, power supply, Dual T1 TDM controller, SNMP & RPM management, 5 blank card faceplates

Adit 600 Base +24V 02-AA2-000000-00 +24V Chassis, power supply, Dual T1 TDM controller, SNMP & RPM management, 5 blank card faceplates

8 FXS Ports 02-AA1-A00000-00 115/-48V Chassis, power supply, Dual T1 TDM controller, SNMP & RPM management, 5 blank card faceplates, (1) 8-port FXS card 16 FXS Ports 02-AA1-AA0000-00 115/-48V Chassis, power supply, Dual T1 TDM controller, SNMP & RPM management, 4 blank card faceplates, (2) 8-port FXS cards

24 FXS Ports 02-AA1-AAA000-00 115/-48V Chassis, power supply, Dual T1 TDM controller, SNMP & RPM management, 3 blank card faceplates, (3) 8-port FXS cards

32 FXS Ports 02-AA1-AAAA00-00 115/-48V Chassis with power supply, Dual T1 TDM controller, SNMP & RPM management, 2 blank card faceplates, (4) 8-port FXS cards

40 FXS Ports 02-AA1-AAAAA0-00 115/-48V Chassis with power supply, Dual T1 TDM controller, SNMP & RPM management, 1 blank card faceplates, (5) 8-port FXS cards

48 FXS Ports 02-AA1-AAAAAA-00 115/-48V Chassis with power supply, Dual T1 TDM controller, SNMP & RPM management, (6) 8-port FXS cards

Adit 600 Base and 2 V.35 Ports 02-AA1-00000C-00 115/-48V Chassis, power supply, Dual T1 TDM controller, SNMP & RPM management, 5 blank card faceplates, and (1) 2-port V.35 Card 

8 FXS and 2 V.35 Ports 02-AA1-A0000C-00 115/-48V Chassis, power supply, Dual T1 TDM controller, SNMP & RPM management, 4 blank card faceplates, (1) 8-port FXS card, (1) 2-port V.35 card

16 FXS and 2 V.35 Ports 02-AA1-AA000C-00 115/-48V Chassis, power supply, Dual T1 TDM controller, SNMP & RPM management, 3 blank card faceplates, (2) 8-port FXS cards, (1) 2-port V.35 card

24 FXS and 2 V.35 Ports 02-AA1-AAA00C-00 115/-48V Chassis, power supply, Dual T1 TDM controller, SNMP & RPM management, 2 blank card faceplates, (3) 8-port FXS cards, (1) 2-port V.35 card

16 FXS and Quad T-1 Card 02-AA1-AA000E-00 115/-48V Chassis with power supply, Dual T1 TDM controller, SNMP & RPM management, 3 blank card faceplates, (2) 8-port FXS cards and (1) Quad T1 Card

Adit 600 Base with Router 02-AA1-00000H-00 115/-48V Chassis, power supply, Dual T1 TDM controller, SNMP & RPM management, 5 blank card faceplates, and (1) Router Card

8 FXS Ports and Router 02-AA1-A0000H-00 115/-48V Chassis with power supply, Dual T1 TDM controller, SNMP & RPM management, 4 blank card faceplates, (1) 8-port FXS cards and (1) Router Card

16 FXS Ports and Router 02-AA1-AA000H-00 115/-48V Chassis with power supply, Dual T1 TDM controller, SNMP & RPM management, 3 blank card faceplates, (2) 8-port FXS cards and (1) Router Card

24 FXS Ports and Router 02-AA1-AAA00H-00 115/-48V Chassis with power supply, Dual T1 TDM controller, SNMP & RPM management, 2 blank card faceplates, (3) 8-port FXS cards and (1) Router Card

32 FXS Ports and Router 02-AA1-AAAA0H-00 115/-48V Chassis with power supply, Dual T1 TDM controller, SNMP & RPM management, 1 blank card faceplates, (4) 8-port FXS cards and (1) Router Card

40 FXS Ports and Router 02-AA1-AAAAAH-00 115/-48V Chassis with power supply, Dual T1 TDM controller, SNMP & RPM management, (5) 8-port FXS cards and (1) Router Card

40 ISDN-BRI Ports 02-AA1-EDDDDD-00 115/-48V Chassis, power supply, Dual T1 TDM controller, SNMP & RPM management, (5) Octal ISDN-BRI, 1 Quad T1

Configured E1 Systems

Adit 600 E1 Base 115/-48V 02-CA1-000000-00 115/-48V Chassis, power supply, Dual E1 TDM controller, SNMP & RPM management, 5 blank card faceplates

6 E1 Ports and Router 02-CA1-LH0000-00 115/-48V Chassis, power supply, Dual E1 TDM controller, SNMP & RPM management, 4 blank card faceplates, (1) Quad E1 Card and (1) Router Card

 

Components

115/-48V Chassis 02-000-000000-00 Empty 115/-48V Enclosure with backplane and 5 blank card faceplates.

115/-48V Power Supply Card 730-0040 115VAC/-48VDC power supply / battery charger w/ AC cord for 115/-48V Adit 600 Base P/No. 02-AA1-000000-00 and 115/-48V Chassis P/No. 02-000-000000-00

+24VDC Power Supply Card 740-0064 +24VDC Power Supply Card for +24V Adit 600 Base P/No. 02-AA2-000000-01

230V Power Supply 740-0082 230V Power Supply

Dual T1 TDM Controller Card 740-0039 One controller card required per system or chassis. Includes SNMP & RPM management features. Note: Minimum controller software release required is Rev.1.2.2

Dual E1 TDM Controller Card 740-0071 One controller card required per system or chassis. Includes SNMP & RPM management features. Note: Minimum E1 controller software release required is Rev.3.2.0

CMG Router Card 740-0070 CMG Router Card

Quad Terminal Server Router Card 740-0079 Quad Terminal Server Router Card, Note: Minimum controller software release required  is Rev. 4.1

Octal P-phone Card 740-0088 8-channel P-phone card for Nortel Electronic Business Set (EBS) applications. Note: Minimum controller software release required is Rev. 6.0.

FXS-8 Card 740-0036 8 channel expansion or replacement card for FXS or E&M conversion interface applications. Note: Obsolete Part - Superceded by 740-0063

FXS-8 Card 740-0063 8 channel expansion or replacement card for FXS or E&M conversion interface applications. Note: Minimum controller software release required is Rev. 1.5

FXO-8 Card 740-0037 8 channel expansion or replacement card for FXO or DPT interface applications Note: Minimum controller software release required is Rev. 1.2.2

Quad T1 Card 740-0044 Four channel T1 card for voice and data applications. Note: Minimum controller software release required is Rev. 1.3.1

Quad E1 Card 740-0072 Four channel E1 card for voice and data applications. Note: Minimum controller software release required is Rev. 3.2.0

Dual V.35 Card 740-0038 Two-channel V.35 data card for connecting a router or other data equipment. Requires one V.35 cable (listed below) per port. 

Dual V.35 Card with V.54 Test Capability 740-0065 Two-channel V.35 data card with V.54 loopback and BERT Test Capability. Note: Minimum controller software release required is Rev. 3.0.1

Dual ISDN BRI Card 740-0041 Two-channel ISDN BRI card for 3DS0 LULT or LUNT applications. Note: Minimum controller software release required is Rev. 1.2.2

Quad ISDN BRI Card 740-0048 Four-channel ISDN BRI card for 3DS0 LULT or LUNT applications. Note: Minimum controller software release required is Rev. 1.2.2

Octal ISDN BRI Card 740-0042 Eight-channel ISDN BRI card for 3DS0 LULT or LUNT applications. Note: Minimum controller software release required is Rev. 1.2.2

10/100 Base-TX Router Card 740-0047 Single port router supporting IP/IPX routing and layer 2 bridging. Note: Minimum controller software release required is Rev. 1.4.1

Single Port OCU-DP Card 740-0066 Single port all rate OCU-DP Card for DDS Service delivery applications. Note: Minimum controller software release required is Rev. 3.2.0

Quad Port OCU-DP Card 740-0067 Quad port all rate OCU-DP Card for DDS Service delivery applications. Note: Minimum controller software release required is Rev. 3.2.0

Blank Faceplates 710-0011 Blank faceplates for empty service card slots.


Adit 600 Accessories

19" and 23" NEBS CO Rack Installation Kit 710-0019 NEBS certified 19" and 23" rack mount solution for mounting two Adit 600 chassis sideby- side. Allows 4 RU (7") rack spacing per Adit 600 rack assembly.

19" and 23" Rack Installation Kit 710-0016 19" and 23" rack mount brackets for mounting two Adit 600 chassis side-by-side, 6-pin mating alarm connector and ground lug. Allows 6 RU (10.5") rack spacing per Adit 600 assembly.

Two-conductor DC power connectors (5 ea.) 790-0004 Mates with -48 DC power connector on rear of Adit 600.

Single Rack Installation Kit connectors & mounting hardware 790-0006 Contains ground lug, mating DC power and alarm connectors, mounting hardware.

One DC power connector, one grounding lug 790-0008 Mates with -48 DC power connector and ground studs on rear of Adit 600.

Serial Console Cable - 12 ft. 005-0064 12 ft. serial console cable with a DB-9 female and DB-9 male

Dual T1 TDM Operating System Update 750-0027 CD ROM for TFTP-loaded field update. Includes SNMP and RPM management.

Manual (CD-ROM) 770-0008 CD ROM version of Adit 600 manual. Included with each Adit 600 system.

Manual (Hard Copy) 770-0009 Paper version of the Adit 600 manual.

Speedway optional 2nd Battery Shel 710-0025 Optional 2nd battery mounting shelf for Speedway wall mount configurations. (Note: Battery Unit P/N 730-0114 must be ordered seperately)

Speedway dual battery cable 005-0091 Dual battery cable, used when using Speedway Installation Kit and 2nd Battery

Speedway Installation Kit 710-0024 Wall Mount Kit with Swing away brackets for mounting single Adit 600 and power backup battery. (Note: Battery Unit P/N 730-0114 must be ordered seperately)

 

Universal Accessories

Null Modem Adapter 005-0002 25-pin male/25-pin male

DB-9 to DB-25 Female Adapter 005-0007 DB-9 to DB-25 female adapter

V.35 Data Cable - 10 ft.

male V.35/male Winchester 005-0008 10 ft. V.35 Data Cable - male V.35 / male Winchester

V.35 Data Cable - 10 ft.

male V.35/female Winchester 005-0014 10 ft. V.35 Data Cable - male V.35 / female Winchester

Installation Connector Kit 790-0011 One 66 block, one T-1 cable, one 10' Amphenol cable

Battery Unit 730-0114 Battery unit for use with Adit 600.

V.35 Data Cable - 25 ft.

male V.35/female Winchester 005-0068 25 ft. V.35 Data Cable - male V.35 / female Winchester

V.35 Data Cable - 50 ft.

male V.35/female Winchester 005-0069 50 ft. V.35 Data Cable - male V.35 / female Winchester

V.35 Data Cable - 25 ft.

male V.35/male Winchester 005-0009 25 ft. V.35 Data Cable - male V.35 / male Winchester

V.35 Data Cable - 50 ft.

male V.35/male Winchester 005-0010 50 ft. V.35 Data Cable - male V.35 / male Winchester

T1 Cable - 25 ft. 005-0101 25 ft. RJ48C-to-RJ48C T1 Straight Cable, RJ45 plug on each end

Ethernet Crossover Cable - 2 ft. 005-0102 2 ft. RJ45-to-RJ45 Ethernet Crossover Cable, RJ 45 plug on each end

Ethernet Straight Cable - 6 ft. 005-0103 6 ft. RJ45-to-RJ45 Ethernet Straight Cable, RJ 45 plug on each end

RJ48C-to-DB15P T1 Connector

Adaptor 005-0104 RJ48C-to-DB15P T1 Connector Adaptor 

RJ45-to-DB9P Connector Adaptor 005-0105 RJ45-to-DB9P Connector Adaptor - wired with TXD, RXD and SG

RJ45-to-DB9P Connector Adaptor 005-0106 RJ45-to-DB9P Connector Adaptor - wired with control signals

 

 




Products & Services

Get our specials by email!